Three-dimensional nickel-coated silicon microchannel plates for supercapacitors
-
摘要: 采用无电镀方法在硅微通道板上制备镍,然后进一步通过化学液相沉积法,在其上面制备了氢氧化镍纳米晶体,获得了一种具有独特三维结构的Si-MCP/Ni/Ni(OH)2超级电容器.研究发现,制得的氢氧化镍晶体由许多纳米薄片组成,XRD图谱显示其具备和两种晶型.通过循环伏安和计时电位法对该超级电容器进行了性能测试.在放电电流为10 mA时,样品获得最大放电比容量,为2 150 F/g.在多次循环测试中,样品的稳定性良好.随着退火温度的升高,样品的容量下降.研究发现氢氧化镍的表面积减小是导致容量衰减的主要原因.由于该电容器有着巨大的比容量和良好的稳定性,该三维结构有望应用于二次电源和相关器件中.Abstract: A unique three-dimensional Si-MCP/Ni/Ni(OH)2 structure for supercapacitor was produced. Chemical liquid deposition was carried out to grow nano-sized Ni(OH)2. The as-prepared Ni(OH)2 film consists of many intertwined nano-flakes with both the - and -Ni(OH)2 phases. The formation mechanism of Ni(OH)2 was introduced. The as-prepared and annealed materials were evaluated electrochemically by cyclic voltammetry and chronopotentiometry. The cyclic voltammetry results reveals a typical redox characteristic of the sample. A specific capacitance of 2 150 F/g was observed at a discharge current of 10 mA, and the structure has high stability in prolonged charging and discharging experiments. The capacitance of the annealed sample decreases as the annealing temperature increases. Surface morphology of the samples after 2 000 cycles and annealed samples were observed. Decrease of the surface area of Ni(OH)2 is consi-dered as the main reason of the capacitive loss. Owing to the large specific capacitance and good stability, the unique structure is suitable for electrochemical super-capacitors used in secondary power sources and devices.
-
Key words:
- three-dimensional /
- silicon microchannel plate /
- nickel hydroxide /
- supercapacitors
-
[1] [1] SIMON P, GOGOTSI Y. Materials for electrochemical capacitors[J]. Nature Materials, 2008, 7(11): 845-854.[2] BURKE A. Ultracapacitors: why, how, and where is the technology[J]. Journal of Power Sources, 2000, 91(1): 37-50.[3] KOTZ R, CARLEN M. Principles and applications of electrochemical capacitors[J]. Electrochimica Acta, 2000, 45(15): 2483-2498.[4] PANG S C, ANDERSON M A, CHAPMAN T W. Novel electrode materials for thin-film ultracapacitors: Comparison of electrochemical properties of sol-gel-derived and electrodeposited manganese dioxide[J]. Journal of the Electrochemical Society, 2000, 147(2): 444-450.[5] WANG Y H, ZHITOMIRSKY I. Electrophoretic deposition of manganese dioxide-multiwalled carbon nanotube composites for electrochemical supercapacitors[J]. Langmuir, 2009, 25(17): 9684-9689.[6] CHEN S, ZHU J W, HAN Q F, et al. Shape-controlled synthesis of one-dimensional MnO2 via a facile quick-precipitation procedure and its electrochemical properties[J]. Crystal Growth Design, 2009, 9(10): 4356-4361.[7] NAGARAJAN N, HUMADI H, ZHITOMIRSKY I. Cathodic electrodeposition of MnOx films for electrochemical supercapacitors[J]. Electrochimica Acta, 2006, 51(15): 3039-3045.[8] AN G M, YU P, XIAO M J, et al. Low-temperature synthesis of Mn3O4 nanoparticles loaded on multi-walled carbon nanotubes and their application in electrochemical capacitors[J]. Nanotechnology, 2008, 19(27): 275709.[9] PATIL U M, GURAV K V, FULARI V J, et al. Characterization of honeycomb-like beta-Ni(OH)2 thin films synthesized by chemical bath deposition method and their supercapacitor application[J]. Journal of Power Sources, 2009, 188(1): 338-342.[10] ROBERTS M E, WHEELER D R, MCKENZIE B B, et al. High specific capacitance conducting polymer supercapacitor electrodes based on poly(tris(thiophenylphenyl)amine)[J]. Journal of Materials Chemistry, 2009, 19(38): 6977-6979.[11] ZHANG K, ZHANG L L, ZHAO X S, et al. Graphene/polyaniline nanoriber composites as supercapacitor electrodes[J]. Chemistry of Materials, 2010, 22(4): 1392-1401.[12] FANG Y, LIU J, YU D J, et al. Self-supported supercapacitor membranes: polypyrrole-coated carbon nanotube networks enabled by pulsed electrodeposition[J]. Journal of Power Sources, 2010, 195(2): 674-679.[13] DAI H J, WONG E W, LIEBER C M. Probing electrical transport in nanomaterials: conductivity of individual carbon nanotubes[J]. Science, 1996, 272(5261): 523-526.[14] EBBESEN T W, LEZEC H J, HIURA H, et al. Electrical conductivity of individual carbon nanotubes[J]. Nature, 1996, 382(6586): 54-56.[15] NIU C M, SICHEL E K, HOCH R, et al. High power electrochemical capacitors based on carbon nanotube electrodes[J]. Applied Physics Letters, 1997, 70(11): 1480-1482.[16] SUN D, RILEY A E, CADBY A J, et al. Hexagonal nanoporous germanium through surfactant-driven self-assembly of Zintl clusters[J]. Nature, 2006, 441(7097): 1126-1130.[17] ATTARD G S, BARTLETT P N, COLEMAN N R B, et al. Mesoporous platinum films from lyotropic liquid crystalline media[J]. Science, 1997, 278: 838-840.[18] GANESH V, LAKSHMINARAYANAN V, Preparation of high surface area nickel electrodeposit using a liquid crystal template technique[J]. Electrochimica Acta, 2004, 49(21): 3561-3572.[19] NELSON P A, OWEN J R, A high-performance supercapacitor/battery hybrid incorporating templated mesoporous electrodes[J]. Journal of the Electrochemistry Society, 2003, 150(10): A1313-A1317.[20] WU M S, WANG M J. Nickel oxide film with open macropores fabricated by surfactant-assisted anodic deposition for high capacitance supercapacitors[J]. Chemical Communications, 2010, 46(37): 6968-6970.[21] INAMDAR A I, KIM Y S, PAWAR S M, et al. Chemically grown, porous, nickel oxide thin-film for electrochemical supercapacitors[J]. Journal of Power Sources, 2011, 196(4): 2393-2397.[22] CONWAY B E. Electrochemical Supercapacitors: Scientific Fundamentals and Technological Applications[M]. New York: Plenum, 1999.[23] MIAO F J, TAO B R, SUN L, et al. Capacitive humidity sensing behavior of ordered Ni/Si microchannel plate nanocomposites[J]. Sensors and Actuators: A Physical, 2010, 160(1): 48-53.[24] DEKI S, AOI Y, MIYAKE Y, et al. Novel wet process for preparation of vanadium oxide thin film[J]. Materials Research Bulletin, 1996, 31(11): 1399-1406.[25] KAMATH P V, DIXIT M, INDIRA L, et al. Stabilized alpha-Ni(OH)2 as electrode material for alkaline secondary cells[J]. Journal of the Electrochemical Society, 1994, 141(11): 2956-2959.[26] JAYASHREE R S, KAMATH P V. Suppression of the αβ-nickel hydroxide transformation in concentrated alkali: Role of dissolved cations[J]. Journal of Applied Electrochemistry, 2001, 31(12): 1315-1320.[27] ZHENG J P, CYGAN P J, JOW T R. Hydrous ruthenium oxide as an electrode material for electrochemical capacitors[J]. Journal of the Electrochemical Society, 1995, 142(8): 2699-2703.[28] JIANG J H, KUCERNAK A. Electrochemical supercapacitor material based on manganese oxide: preparation and characterization[J]. Electrochimica Acta, 2002, 47(15): 2381-2386.[29] ZHAO D D, BAO S J, ZHOU W H, et al. Preparation of hexagonal nanoporous nickel hydroxide film and its application for electrochemical capacitor[J]. Electrochemistry Communications, 2007, 9(5): 869-874.[30] GAMBY J, TABERNA P L, SIMON P, et al. Studies and characterisations of various activated carbons used for carbon/carbon supercapacitors[J]. Journal of Power Sources, 2001, 101(1): 109-116.[31] LOZANO-CASTELLO D, CAZORLA-AMOROS D, LINARES-SOLANO A, et al. Influence of pore structure and surface chemistry on electric double layer capacitance in non-aqueous electrolyte[J]. Carbon, 2003, 41(9): 1765-1775.[32] YUAN D, CI P L, TIAN F, et al. Large-size P-type silicon microchannel plates prepared by photoelectrochemical etching[J]. Journal of Microlithography, Microfabrication, and Microsystems, 2009, 8(3): 033012.
点击查看大图
计量
- 文章访问数: 2625
- HTML全文浏览量: 37
- PDF下载量: 2294
- 被引次数: 0