Electrical conductivity properties of modified polyacrylonitrile/MWNTs composites
-
摘要: 采用溶液聚合的方法制备聚丙烯腈,对聚丙烯腈进行热处理改性后,与碳纳米管共混制备复合材料.与未改性处理的复合材料相比,电导率提高了2个多数量级.用FTIR、Raman和XPS等方法进行研究,结果表明聚丙烯腈经热处理改性后,部分腈基(C〖KG-*5/7〗N)转变为亚胺基(C=〖KG-*4/7〗=N),其链状结构向环状结构转化,MWNTs上的电子与改性后聚丙烯腈的电子之间形成强的-共轭,增强了改性聚丙烯腈与碳纳米管之间的相互作用,提高了复合材料的导电性能.Abstract: The PAN was synthesised by solution polymerization, modified by heat-treatment and then blended with carbon nanotube to obtain the composites. The electrical conductivity of the composites increased by two orders of magnitude more than that unmodified. Fourier transform infrared spectroscopy (FTIR), Raman spectra and X-ray spectroscopy (XPS) were used to characterize the composites. The results showed that some nitrile were changed into imino, and the chain-like structure also transformed to the cyclic structure after heat-treatment. The strong - system was formed between -electrons of MWNTs and the modified PAN. The interaction between the modified polyacrylonitrile and carbon nanotubes was greatly enhanced. The electrical conductivity was highly improved.
-
Key words:
- MWNTs /
- polyacrylonitrile /
- heat-treatment modification /
- electrical conductivity
-
[1] [1] BYRNE M T, GUN’KO Y K. Recent advances in research on carbon nanotube-polymer composites[J]. Adv Mater, 2010, 22: 1672-1688.[2] SPITALSKY Z, TASIS D, PAPAGELIS K, et al. Carbon nanotube-polymer composites: chemistry, processing, mechanical and electrical properties[J]. Prog Polym Sci, 2010, 35: 351-401.[3] SAHOO N G, RANA S, CHO J W, et al. Polymer nanocomposites based on functionalized carbon nanotubes[J]. Prog Polym Sci, 2010, 35: 837-867.[4] JIN H, CHAO G. Functionalization of carbon nanotubes and other nanocarbons by azide chemistry[J]. Nano-Micro Lett, 2010, 2: 213-226.[5] ZHANG H L, XU L H, YANG F Y, et al. The synthesis of polyacrylonitrile/carbon nanotube microspheres by aqueous polymerization under ultrasonication[J]. Carbon, 2010, 48: 688-695.[6] ZHOU H, TANG X Y, DONG Y M, et al. Multiwalled carbon nanotube/polyacrylonitrile composite fibers prepared by in situ polymerization[J]. J Appl Polym Sci, 2011, 120: 1385-1389.[7] CHENG Z P, PAN Q M, REMPEL G L. Modification of multiwall carbon nanotubes via soap-free emulsion polymerization of acrylonitrile[J]. J Polym Sci, Part A: Polym Chem, 2010, 48: 2057-2062.[8] GUO H N, MINUS M L, JAGANNATHAN S, et al. Polyacrylonitrile/carbon nanotube composite films[J]. ACS Appl Mater Inter, 2010, 2: 1331-1342.[9] JAIN R, MINUS M L, CHAE H G, et al. Processing, structure, and properties of PAN/MWNT composite fibers [J]. Macromol Mater Eng, 2010, 295: 742-749.[10] WANG Y, YIN W Y. Chemical modification for PAN fibers during heat-treatment process[J]. Physics Procedia, 2011, 18: 202-205.[11] HAN S J, KIM B, SUH K D. Electrorheological properties of poly(acrylonitrile) microspheres coated with multiwall carbon nanotubes[J]. Mater Lett, 2007, 61: 3995-3999.[12] SREEKUMAR T V, CHANDRA L, SRIVASTAVA A, et al. Oxidative stabilization of polyacrylonitrile in the presence of functionalized carbon nanotubes[J]. Carbon, 2007, 45: 1105-1136.[13] LV M Y, GE H Y, CHEN J. Study on the structure and skin-core structure of polyacrylonitrile-based fibers during stabilization[J]. J Polym Res, 2009, 16: 513-517.[14] VAISMAN L, LARIN B, DAVIDI I, et al. Processing and characterization of extruded drawn MWNT-PAN composite filaments[J]. Composites Part A, 2007, 38: 1354-1362.
点击查看大图
计量
- 文章访问数: 2356
- HTML全文浏览量: 69
- PDF下载量: 2586
- 被引次数: 0